DURALABEL 7000 DRIVER

The printer will do what it can, and then stop. The print head lever is not properly shut. Default – 1 bit 2 bits Auto Sensor Default: In the lower left corner of this window, click on Display. Be sure you are browsing in your My Documents folder. If you cannot find the answers you need in this manual, please feel free to give us a call. Print head is Open:

Uploader: Mezicage
Date Added: 1 February 2007
File Size: 65.32 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 76542
Price: Free* [*Free Regsitration Required]

Set Media Settings to Continuous, for continuous vinyl. Click on column header A; right-click and select Copy.

Duralabel Manuals

If the same thing happens again, please contact our support team for help. Then, try printing your label once more. Vinyl should pass over and slightly beyond the platen roller.

Reset and Recalibrate Save your label design, and close any open programs. We offer free support for the lifetime of our printers, and free labeling advice and assistance for all of our customers. If you have other questions, please contact our duralavel team for help. Set the clock and clock display. Open a blank label template in Word.

For these labels, you may need to use a special Extended Print option. The printer resumes standby mode when the pause button is pressed again.

  ADAPTEC AIC-7890AB DRIVER

Check the Ribbon Loading Open the Toro’s lid and raise the print head mechanism, as if you were going to change all the supplies. If you use Windows 8 or Windows 8. Table of Contents Add to my manuals Add.

Read our full trademark policy. The Darkness setting may be too low. You can adjust where the printer cuts to make sure the cut is directly centered in the gap by adjusting the Stop Position in the Stock tab of the Printer Properties. There may even be no printing ribbon loaded. Click OK to apply those changes and close the window.

Hold 70000 ESC key for ten seconds, then release it; the system will turn on.

DuraLabel 7000 Quick Start Manual

The Excel column should now appear on the Word label. Turn off the printer again, wait about five seconds, press and hold the button, and turn the system back on. Pick the appropriate setting then click Next.

Under Supply Calibrationmake sure that the selection matches the type of label stock in the printer: You can get a SafetyPro 9G package deal for far less than you’d pay for a similar bundle duralabell DuraLabel!

  ESI MAYA44E DRIVER

The ribbon should be smooth at both spindles and across the print head — not folded back against itself. I the symbols from the DuraLabel CD have been installed duralael auto-install with the templatesa folder will appear inside My Documents named DuraLabel Change the size of the graphic by dragging its corner to make the image the desired size. Wait about five seconds, and turn the printer on again.

Then, set the Print Speed to 2 inches per second.

Printer Support – Drivers, Manuals & More | Graphic Products

When password protect is enabled, the password is required for entering Setting Mode. Introduction Thank you for purchasing the DuraLabel wide-format label and sign printer. Choose Initializethe second-to-last option on the main menu. If prompted to continue, click Continue Anyway.

The ribbon is dugalabel installed properly, the ribbon is gone, or the supply shaft is not moving properly.