The descriptor structure is defined in the Buffer Descriptor Figure. Each time an Ethernet frame is put in the transmit queue, an event is sent to the transmit thread, which empty the queue by sending each outcoming frame. Then the driver connects an interrupt handler to the interrupt line driven by the Ethernet controller the only interrupt which will be treated is the receive interrupt and launches 2 threads: Command and Variable Index Index. Write the Driver Statistic-Printing Function 4. Early versions used National transcievers, but later versions are depopulated ZX boards.
|Date Added:||26 April 2006|
|File Size:||5.73 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Currently, this tool does not support the DEC board. We choose to use only one buffer def bytes per descriptor. We have used it to configure the board.
We have chosen to use 7 receive buffers and 1 transmit buffer to optimize memory allocation due to cache and paging problem that will be explained in the section Encountered Problems. On Intel, the memory region cache management is available only if the paging unit is enabled.
7. DEC Driver — RTEMS Networking User Manual (master) documentation
Understand the network scheduling conventions 3. Here is a non exhaustive list of adapters which support this driver:.
Tapping Into an Interface 4. Many Ethernet adapter cards use the Tulip chip. This thread is also event driven. List of Ethernet cards using the DEC chip 8.
RTEMS 4.6.6 On-Line Library
By reading or writing these registers, a driver can obtain information about the type of the board, the interrupt it uses, the mapping of the z; specific registers, … On Intel target, the chip specific registers can be accessed via def methods: Because we use only one transmit buffer, we are sure that the frame is well-sent before sending the next. Write the Driver Transmit Task 3. Once the attach function executed, the driver initializes the DEC chip.
Adding a Default Route 4. We plan to port the DEC driver for the Netboot tool. Driver basic operation 5.
Write the Dsc Statistic-Printing Function 4. First version of this document. This board includes an Ethernet controller based on a DEC chip. Then the driver connects an interrupt handler to the interrupt line driven by the Ethernet controller the only interrupt which will be treated is the receive interrupt and launches 2 threads: First draft of this document Planned releases: This chapter describes rapidely the PCI interface of this Ethernet controller.
Software and Drivers for the Intel® PRO/ Adapter
cec We have 7 receive buffers and 1 transmit buffer, and for each, 1 descriptor: Each descriptor can reference one or two memory buffers. Write the Driver Receive Task 3. Here is a non exhaustive list of adapters which support this driver: Accton EN All three media types supported. Additional include files 4. Finally, we will see what will be done for ChorusOs and Netboot environment.
This thread is event driven. It means 2110 we will have to re-write some mechanisms of this driver. Write the Driver Start Function. Testing the Driver 5. One buffer has bytes, one descriptor has 16 bytes.